SRRC is the State Radio Regulatory Commission of the people's Republic of China

 

SRMC certification (also known as SRRC certification)

 

 

 

Since June 1, 1999, China's Ministry of information industry (MII) has imposed that all radio component products sold and used in China must obtain radio type approval certification.

 

 

 

The China National Radio Monitoring Center (State Radio Monitoring Center, SRMC), formerly known as the State Radio Regulation Committee (SRRC), is the only Chinese mainland authorized testing and certification authority for radio type approval. At present, China has established special frequency ranges for different types of radio transmitting equipment, and not all frequencies can be used legally in China. In other words, all radio transmitting equipment sold or used in its territory will have different frequencies. In addition, the applicant must pay attention to the specified scope of certain radio transmitting equipment, not only to apply for "radio type approval certification", but also to apply for China Compulsory Certification (CCC) and / or network access license (MII).

 

 

 

The national radio monitoring center is a public institution directly under the Ministry of information industry of the people's Republic of China. It mainly undertakes radio monitoring and radio spectrum management, and is the supporting organization of China's radio management.

 

 

 

The center consists of 10 departments, 1 national monitoring station, 8 National shortwave / satellite monitoring stations, 1 ultrashort wave monitoring station and 1 data backup center. At present, there are 152 staff, including 117 in Beijing and 35 outside Beijing. There are 119 with bachelor degree or above, accounting for 79% of the total number of employees. Among them, there are 96 with intermediate or above titles, accounting for 63% of the total number of employees.

 

 

 

The center has always been at the forefront of China's radio monitoring work. It has accomplished daily monitoring, equipment testing, spectrum research and other work. It has made great achievements in many major monitoring tasks, such as protecting the dedicated spectrum for civil aviation navigation and ensuring the safety of radio information during major national activities. It has played an irreplaceable role in the national radio management.

 

 

 

In recent years, the center has continuously strengthened the construction of talent team and technical facilities, which has effectively promoted the modernization and scientization of radio management. At present, the national radio management information network has been basically completed, and the national radio short wave monitoring network and the national radio satellite monitoring network have also begun to take shape. At present, the center is committed to comprehensively improving the supporting capacity of radio management and making new contributions to the healthy development of China's Radio industry.

 

 

 

 

 

Materials to be prepared for SRRC application

 

 

 

1. Application form (2 copies)

 

 

 

2. Power of attorney (two copies)

 

 

 

3. Customer's business license

 

 

 

4. Customer's ISO Certificate or company profile and capability statement

 

 

 

5. Circuit diagram, specification, block diagram and relevant test report (such as FCC ID)

 

 

 

6. Antenna peak gain and antenna pattern

 

 

 

7. Test direction

 

 

 

8. Business license of the company (annual inspection cannot be expired)

 

 

 

9. 3 copies of color photos of EUT (each interface and each side must be included)

 

 

 

10. Frequency channel comparison table (if there are many working channels, such as DSSS or FHSS products)

NCC is the abbreviation of the National Communications Commission, which mainly controls the communication and information equipment circulating and used in Taiwan market

 

1. LPE: low power equipment, i.e. low power equipment (such as Bluetooth and WiFi equipment);

 

Two TTE:Telecommunications Terminal Equipment refers to communication terminal equipment (e.g. mobile phone, tablet equipment)

 

NCC certified product range

 

1. Low power video motor operating frequency from 9KHz to 300GHZ

 

Such as: wireless routing (WLAN) products (including IEEE 802.11a / B / g), inii, Bluetooth products, RFID, ZigBee, wireless keyboard, wireless mouse, wireless headset microphone, radio walkie talkie, radio remote control toys, various radio remote controls, various types of wireless anti-theft devices, etc

 

2. PSTN products

 

Such as wired telephone (including VoIP network telephone), automatic alarm equipment, telephone answering machine, fax machine, remote control device, wired telephone wireless main and auxiliary machine, key telephone system, data equipment (including ADSL equipment), incoming call display terminal equipment, 2.4GHz radio frequency telecommunication terminal equipment, etc

 

3. Land mobile communication network equipment (PLMN) products

 

Such as: wireless broadband access mobile station equipment (wimax mobile terminal equipment), GSM 900 / DCS 1800 mobile phone and terminal equipment (2G mobile phone), third generation mobile communication terminal equipment (3G mobile phone), 4G communication equipment, etc

 

NCC symbol scale description

 

NCC logo making method:

 

 

 

1. It should be labeled or printed on the equipment body in proper proportion, without the maximum / minimum size requirements, with the principle of clarity

 

2. The NCC mark, together with the inspection number, shall be attached to the product in accordance with the regulations. Its color shall be single, and it shall be clear and easy to identify

 

Basic information of differences between BSMI certification and NCC certification in Taiwan:

NCC certification process:

 

1. The client shall provide product information to the organization for evaluation and quotation

 

2. The entrusting party shall confirm the quotation, fill in the application form, provide samples, materials, arrange funds, and open a case

 

1. Arrange product forecast and review data

 

4. If there are problems in the test and data, rectification and retest shall be arranged until they are qualified

 

5. After the test and data are qualified, the certification authority shall issue the test report and issue the certificate

 

 

 

NCC certification preparation materials:

 

1. Schematic diagram of product circuit

 

2. Product block diagram

 

3. Product instructions / specifications

 

4. BOM

 

6. Fixed frequency prototype

 

7. Corresponding service application form

 

The radio electricity law requires the type approval of the specified radio equipment (i.e. the compliance certification of technical regulations). Certification is mandatory, and the certification organization is the registration certification organization approved by mic in the designated radio equipment planning. Telec (Telecom Engineering Center) is the leading registration and certification organization for the conformity certification of radio equipment in Japan.

 

(1) Telec certification specification

 

For the skill specification of certification, please refer to the classification and skill specification of specified radio equipment listed in the skill regulation compliance certification system on its official website. It is worth noting that when there is a difference between these skills specifications and the Radio Regulatory Commission rules No. 18, the radio regulations shall prevail.

 

(2) Certification Type

 

Telec certification includes test certification and type certification. Verification and certification is for each equipment unit, which is only useful for each verified equipment unit;

 

Type approval refers to the verification of a sample of a batch of equipment with the same planning and production, which is useful for the batch of equipment, but assuming that the planning or manufacturing of the equipment has changed, the equipment will require de novo certification.

 

It is worth noting that the application requirements of non low power wireless power stations and their terminal equipment should be asked for licenses from mic.

 

In addition, there are two kinds of certification about telecommunication terminal equipment

 

As for general telephone equipment, as long as jate certification is carried out according to the requirements of telecommunication work law;

 

In addition to the requirements of the wireless telecommunication law, the terminal is also certified according to the requirements of the telecommunication law of the people's Republic of China.

 

When wireless products enter the Japanese market, the type approval of Janpan Telecom (mainly for RF part) is required. Now, Shenzhen environmental test & amp; Wei laboratory can complete such inspection and certification, telec certification process, requirement submission materials, WLAN and Bluetooth inspection and certification

 

1. Telec certification process

 

2. Materials submitted for telec certification requirements of wireless communication equipment

 

(1) Technical Type Specification Form

 

(2) Declaration of Quality Management System

 

(3) Letter of Quality Control Confirmation Method or Manufacturer’s ISO 9001 Certificate

 

(4) Letter of Construction Protection Confirmation

 

(5) Rated Power Declaration

 

(6) Antenna Report

 

(7) Test Reports (including Test Results, Test Setup Photos and Examinations carried out)

 

(8) (Block Diagram, Schematic Diagram, Bill of Material, Parts Placement, IC Data Sheets, Internal and External Photos, Product Deion, User manual, Operational/Technical Deion, Deion of Pheripherals/Accessories)

 

(9) Label Information

 

(Label Location, Label content)

 

If you act as agent or as authorized representative of the manufacturer:

 

(10) Power of Attorney / Authorization Letter

 

Clarification: all documents delivered are recommended to be in Japanese, and English documents are also acceptable. The inspection report said that the language used by the local inspection organization could be used.

 

3. Telec certification of WLAN and Bluetooth products

 

Telec is a compulsory certification for wireless products in Japan, which is similar to SRRC in China. It follows the radio wave law of Japan. The detailed inspection specification is in accordance with the notice No.88 regulation of MIC (Ministry of general affairs of Japan), as shown in the following link / J / material/ test.htm The updating and maintenance of inspection specification is also carried out by mic.

 

The inspection items of WiFi and Bluetooth products are basically similar to the European standard EN 300 328

 

The specification of 2.4GHz WiFi products (802.11b/g, 2412-2472 MHz) and Bluetooth products is mic notice No.88 annex43. However, for the 14 channels (channel 14: 2471 ~ 2497mhz) of 2.4GHz WiFi products, annex44 should be used alone for verification and statement.

 

For 5GHz WiFi products (802.11a, 5180 ~ 5320mhz, w52 band and W53 band) comply with the inspection specification of annex45. However, it should be noted that the material flashed, MIC will modify annex 45 in the near future, and 5.6ghz equipment (band w56) will also be included in annex45, and there are more and more severe DFS inspection requirements for band 56 band