OUR SERVICE
Japanese telec certification

Date of issue:2020-05-13

The radio electricity law requires the type approval of the specified radio equipment (i.e. the compliance certification of technical regulations). Certification is mandatory, and the certification organization is the registration certification organization approved by mic in the designated radio equipment planning. Telec (Telecom Engineering Center) is the leading registration and certification organization for the conformity certification of radio equipment in Japan.
 
(1) Telec certification specification
 
For the skill specification of certification, please refer to the classification and skill specification of specified radio equipment listed in the skill regulation compliance certification system on its official website. It is worth noting that when there is a difference between these skills specifications and the Radio Regulatory Commission rules No. 18, the radio regulations shall prevail.
 
(2) Certification Type
 
Telec certification includes test certification and type certification. Verification and certification is for each equipment unit, which is only useful for each verified equipment unit;
 
Type approval refers to the verification of a sample of a batch of equipment with the same planning and production, which is useful for the batch of equipment, but assuming that the planning or manufacturing of the equipment has changed, the equipment will require de novo certification.
 
It is worth noting that the application requirements of non low power wireless power stations and their terminal equipment should be asked for licenses from mic.
 
In addition, there are two kinds of certification about telecommunication terminal equipment
 
As for general telephone equipment, as long as jate certification is carried out according to the requirements of telecommunication work law;
 
In addition to the requirements of the wireless telecommunication law, the terminal is also certified according to the requirements of the telecommunication law of the people's Republic of China.
 
When wireless products enter the Japanese market, the type approval of Janpan Telecom (mainly for RF part) is required. Now, Shenzhen environmental test & amp; Wei laboratory can complete such inspection and certification, telec certification process, requirement submission materials, WLAN and Bluetooth inspection and certification
 
1. Telec certification process
 
2. Materials submitted for telec certification requirements of wireless communication equipment
 
(1) Technical Type Specification Form
 
(2) Declaration of Quality Management System
 
(3) Letter of Quality Control Confirmation Method or Manufacturer’s ISO 9001 Certificate
 
(4) Letter of Construction Protection Confirmation
 
(5) Rated Power Declaration
 
(6) Antenna Report
 
(7) Test Reports (including Test Results, Test Setup Photos and Examinations carried out)
 
(8) (Block Diagram, Schematic Diagram, Bill of Material, Parts Placement, IC Data Sheets, Internal and External Photos, Product Deion, User manual, Operational/Technical Deion, Deion of Pheripherals/Accessories)
 
(9) Label Information
 
(Label Location, Label content)
 
If you act as agent or as authorized representative of the manufacturer:
 
(10) Power of Attorney / Authorization Letter
 
Clarification: all documents delivered are recommended to be in Japanese, and English documents are also acceptable. The inspection report said that the language used by the local inspection organization could be used.
 
3. Telec certification of WLAN and Bluetooth products
 
Telec is a compulsory certification for wireless products in Japan, which is similar to SRRC in China. It follows the radio wave law of Japan. The detailed inspection specification is in accordance with the notice No.88 regulation of MIC (Ministry of general affairs of Japan), as shown in the following link / J / material/ test.htm The updating and maintenance of inspection specification is also carried out by mic.
 
The inspection items of WiFi and Bluetooth products are basically similar to the European standard EN 300 328
 
The specification of 2.4GHz WiFi products (802.11b/g, 2412-2472 MHz) and Bluetooth products is mic notice No.88 annex43. However, for the 14 channels (channel 14: 2471 ~ 2497mhz) of 2.4GHz WiFi products, annex44 should be used alone for verification and statement.
 
For 5GHz WiFi products (802.11a, 5180 ~ 5320mhz, w52 band and W53 band) comply with the inspection specification of annex45. However, it should be noted that the material flashed, MIC will modify annex 45 in the near future, and 5.6ghz equipment (band w56) will also be included in annex45, and there are more and more severe DFS inspection requirements for band 56 band

Last:Taiwan NCC

Next:KCC certification in Korea